Nylander, Matthews and Tavares have already reached the 30-goal mark, while Marner is only four goals away, however he 10 more points than the second best player on the Leafs thus far. Matthews isn’t quite having an MVP season like he did last year, but all four players are above a point-per-game rate and will have 30-goal seasons. Although they had a great season, Marner moved alongside Tavares and has now helped him have his best season since the two were first paired together in the 2018-19 season. The combination of Marner and Matthews helped Matthews win his first Hart Trophy and second Maurice “Rocket” Richard Trophy last year. It hasn’t be a complicated system because it’s clearly worked. For the most part, John Tavares and/or Auston Matthews will play with either Mitch Marner and/or William Nylander with a hard-working player on the other wing. Throughout Sheldon Keefe’s tenure as the head coach of the Toronto Maple Leafs, he hasn’t done anything too unique. The Toronto Maple Leafs have been experimenting with new lines over the past few weeks and may have just found the best combination. They cut production costs by saving waste, speeding up the process and improving accuracy.Ī range of marking-out tools can be used to show where to cut, drill and assemble parts.By Stephen Nixon 2 weeks ago Follow Tweet They are particularly useful for marking out where holes need to be drilled or joints cut. Jigs are tools made specially to help place a material in the same place repeatedly. Where the hole would appear if it were shown in a 3D drawing (third angle orthographic projection): Marking-out tools On this orthographic drawing, one example of a datum reference could be the centre line of the hole, and all measurements could be taken from this before cutting begins They would be used to help a manufacturer make a product accurately. The use of trigonometry can be used to work out accurate angles:Īn orthographic drawing shows the measurements on each surface of an object. Working out reference points in a square shape is simple but most objects are more complex. They can also be used to scale sizes up and down in measurements by using the X- and Y-axis. This is one example of a datum point.ĭatum references are particularly useful for aligning computer aided manufacture (CAM) machines, which use the point where the X- and Y-axis meet as a datum reference. In this example, the opposite corners of the shape are connected with construction lines and the intersection creates a reference point in the centre of the work. In a circular shape, it would be around the edge or from the centre. By taking measurements from a small number of set points, accuracy can be improved and maintained.Ī datum reference can be along the straight edge of a design, known as datum surface, or a single datum point, often found in the corner of a design. When marking out an object, datum references are used as a reference point for all measurements to be taken from and can be chosen by the manufacturer. The UK recommends the use of metric measurements using millimetres (mm), centimetres (cm) and metres (m). Accuracy is vital to a quality finished product.
0 Comments
Leave a Reply. |